New Material Introduction

What Does The Cosmetic Bottle Material Contain(2)



1. Distributor/pump head.

1. The dispenser is divided into two types: zaguchi and screw-type, which can be divided into spray, foundation cream, emulsion pump, air fog valve and vacuum bottle.

2, and the size of the pump head could be set to match the bottle diameter, the spray of the specifications of the 24 mm - 12.5 mm, water yield of 0.1 ml/time - 0.2 ml/second, commonly used in perfumes, gel water with products such as packaging, the length of the same caliber to take over the can be determined according to the height of the bottle.

3. The size of the emulsion pump is 16ml to 38ml, and the amount of water is 0.28ml/ time -- 3.1ml/ time, which is generally used for cream and washing products.

4, special distributor such as foam pump head and hand button type nozzle, is a kind of filling and gas bubble pump type hand pump head, do not need to fill gas to generate foam, can produce high quality quantitatively with light pressure of foam. It is usually equipped with a special bottle. The hand button sprinkler is usually used in products such as detergents.

5, distributor of more complex, generally including: dust cover, press the head, press pole, gaskets, piston, spring, valves, valve cap, pump body, straws, ball (ball, glass ball). Bottle cap, dustproof cover can be colored, can be electroplated, can set electrochemical aluminum ring. Since a set of pump head involves more molds, and the order quantity is larger, the order quantity is 10,000 to 20,000, and the supply period is 15 days to 20 days after the confirmation sample, and the white and general types are usually in stock.

6, usually cylindrical vacuum flask, specification of 15 ml - 50 ml, 100 ml individual and overall capacity is small, by the principle of atmospheric pressure, can avoid cosmetics in use process cause pollution, vacuum flask with electrochemical aluminum, plastic plating and colored plastic, more expensive than other general container, ordinary order request is not high.

7. The distributor customers rarely open the mold themselves, and the cost is higher.

Color printing.

1. Color printing mainly includes color matching, color printing set box, specification, leaflet, poster, picture album and color printing adhesive etc.

2 and complex requirement and material selection, color box packaging, also known as folding cartons, generally with 350 g single copper paper, can choose the appropriate thickness according to the volume and weight is installed inside the cardboard, choose different grades of paper, can form a complete set of corrugated board as lining, take to the fixed, antivibration, or because the container is small, can increase the color box size to increase the appearance generous, with this design principle is try to be simple, is to ensure the strength and will save time for manual assembly.

3, color box, color printing after first framed workers can do modelling of different specifications, color printing paper framed layer for the single copper and aluminum plating paper, can choose different specifications of the grey board or MDF, manual is more, the cost is higher, with his hands are always holding bag, blister/sponge/paper, silk used together.

4. The manual can be selected as ordinary paper 60g -- 80g or 105g and 128g and 157g coated paper, and the single sheet and poster or album will be used for more than 105g of coated paper.

5. Printing adhesive, can choose copper coated paper and various materials, silver aluminum paper or transparent PVC materials.

6. In order to guarantee the design effect, there is a real comparison between the color printing and the documentary. In the output of the film, computer proofing can be done first, and the charge of color and size is charged, usually 75 yuan /P.

7, color printing process and appearance effect can be done with surface grinding or too light rubber, dumb rubber, laser film, hot stamping silver and blow convex effect, beer, sticky box forming or adhesive PVC film (also called windowing) and thermal, color green process, the uv effect, etc.

8. Heat sensitive embossing technology, which has obvious stereoscopic effect after printing without the need of punch and convex, with fluorescence, matte and various color effects, and the process of color green (more in greeting CARDS).

9. The laser has silver and gold CARDS, and can be made into rainbow and local holograms. It has a very high anti-counterfeiting effect.

10. The grinding process is suitable for aluminized film and aluminum foil. The process features strong metal feeling, color harmony and noble, comfortable hand feeling, and the effect of metal etching.

11. Color printing fee standard and features:

A) design, electrical output, proofing and P calculation;

B) the minimum consumption of color printing start-up fee (800 yuan - 1200 yuan), reasonable typesetting and increasing printing quantity, can reduce the unit price.

C) determine the impact of the related expenses according to the number and difficulty of the post-operation process, such as light glue, riding nail, hinge, and pressure line.

Glue, all have corresponding charge standard and minimum consumption.

12. It takes 3-5 days for the production cycle to be printed, and the set box will be difficult to make, and the working day will be increased appropriately. If the package box is mounted, too much glue will be used, and the delivery time will be affected by the weather.

13. Precautions:

A) in order to avoid the large deviation of the finished product and the design color sample, it should be confirmed by proofing and as the quality inspection standard during the printing of the machine.

B) the translation of the instructions should be clear and uniform, and the transport packaging of the color printing class should be explained, if the package box can be considered for secondary use.

C) hand in hand bag can be designed as one side opening and opening on both sides, which can save cost in printing and producing film.

D) printing quantity refers to the quantity of finished products after paper weight rather than printing. For example, the size of the specification is small, and the economic order quantity should be large.

E) the design shall conform to the requirements of the color printing specification, such as the hot stamping film should be produced in the shade, and the other parts of the film should be adapted to the printing characteristics.

14. If the quantity is not enough to meet the minimum printing or economic order, the paper can be mounted directly through the color paper to reduce the cost.

Iii. Aluminum platinum bag

1. According to the material, there are pure aluminum bags, aluminum bags, PV, PE, BOPP, PET, PEGT bags, etc.

2. The form has three side sealing bags, middle sealing bag, sticking bone bag, upright bag, vacuum bag and roll bag.

3, aluminum foil bag and shrinkable film material characteristics: good for keeping fresh, with good quality and prolong the shelf life of high barrier plastic packaging materials, has low cost, light weight, impact resistance, can be transparent, microwave heating, convenient and packaging design options, etc.

4. Pure aluminum bag has metallic texture, easy to wrinkle, can color print, aluminum bag is matte, light can be printed, softer, suitable for the trial packaging of emulsion and paste. PET, aluminized PET and CPE are suitable for shampoo or liquid. BOPP/CPE is suitable for washing powder and other daily necessities.

5, pure aluminium bag is higher than plating bags of about 30% of the cost of the unit price, economic order quantity is large, large manufacturers to smaller manufacturers some taller, 4 cm by 10 cm bag, for example, big manufacturer general in 100000 for the minimum quantity, small manufacturer about 30000 minimum quantity, roll film, such as do not print to do 30 to 50 kg, about 38 yuan/kg, 100 kg minimum quantity, such as printing about 45 yuan/kg, film need special filling equipment, roll film do bag number 6 cm x 9 cm, for example 10 g to about 1200 / kg (6 cm x 8 cm, 8 g about 1500 / kg, 5 cm x 7 cm, 6 with about 1600 g/kg)

6. After the design is confirmed, we will provide MO or cd-rom production and color sample (PinTon) as the basis for making the plate, and ask the manufacturer to confirm the samples before arranging the production.

7, plate-making fee: according to the requirements of different specifications and manufacturers of equipment and graphic design, plate making cost is different, generally between 850 yuan to 850 yuan/color, there are electric engraving and normal version, single text is usable line plate making.

8. The production cycle is usually 15 days to 20 days, and the production time will have a deviation of plus or minus 10%.

9. The production bag is made of high temperature, which is relatively clean and does not need special sterilization when filling.

10. If hand in hand bag, gift bag and the customer with high requirement for printing, it is better to use a better version.

11. Bagged filling and expense, packing material is single, processing fee is 0.08 yuan/piece, processing order quantity is 1000 packages, material loss 2%; Roll film material, processing fee is 0.03 yuan/piece, the processing order quantity is 10000 pack, the loss of material is about 0.8kg(for adjusting machine and actual irrigation quantity).